Home News Buyers Guide About Advertising
 
 
 
   
Results 1 to 5 of 5

Thread: Flash question

  1. #1
    Join Date
    Mar 2006
    Posts
    2

    Flash question

    I recently bought the Panasonic fz30. I have an external flash by Achiever 115a and don't know if it is compatible with this new digital camera. Panasonic warns about non-digital flash. I can't not find an info about this cheapy flash so what do you all think.
    Thanks
    Beccer

  2. #2
    Join Date
    May 2005
    Location
    Newton ,Massachusetts
    Posts
    500
    On this web site, under Panasonic, I have seen this issue addressed. Some one provided a web
    site that has checked the voltages of various flashes. My old flash I cannot use as the voltage is
    too high. There is also information on how to measure the voltage. You might want to check
    there.

    Good luck
    Panasonic FZ20, Kodak DC4800, Canon SD850 for when I don't want to carry a camera
    http://JLVACCARO.4T.COM

  3. #3
    Join Date
    May 2005
    Location
    Newton ,Massachusetts
    Posts
    500
    I found one of the threads I referred to above. The site that was mentioned follows. Your flash is mentioned.


    http://www.botzilla.com/photo/strobeVolts.html
    Panasonic FZ20, Kodak DC4800, Canon SD850 for when I don't want to carry a camera
    http://JLVACCARO.4T.COM

  4. #4
    Join Date
    Mar 2006
    Posts
    2

    not in the list

    thanks for the help but my model was not in the list unfortunately.

  5. #5
    Join Date
    Jul 2005
    Posts
    8,163
    Your flash is the second one on the list. The A/S model is just the A model with slave functionality added.
    Last edited by cdifoto; 03-11-2006 at 07:24 AM.
    Ouch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •