Home News Buyers Guide About Advertising
 
 
 
   
Results 1 to 10 of 10
  1. #1
    Join Date
    Oct 2005
    Location
    Auckland, NZ
    Posts
    5

    Black dot in corner of photos - DSC-P150

    Hi all,

    I am finding that most of the time (depending on what I'm photographing and/or the amount or angle of light) I get a black dot or splodge in the corner of photos taken with my DSC-P150 camera. I have read elsewhere that this could be dust or dirt on the CCD sensor. Would anyone know if this is the case? Or is it something to do with the lens? (since zooming in makes the black dot more visible). Is the problem fixable? If so, what would the likely cost be? I've linked some photos below and circled the black dot in red. Thanks for any help.

    Zoomed out:

    Zoomed in:





  2. #2
    raulvesna Guest

    Dust on sensor

    Hi,

    It seems that your camera has dust on the CCD, IR filter or lens assembly.
    There was a post at

    http://forums.dpreview.com/forums/re...ssage=14993643

    that explains how to fix the problem.
    I wouldn't send the camera to Sony for repair. My P200 had the same problem, and after 1 month they not only couldn't fix the problem, but they scratched the LCD and left dust in the viewfinder. After a lot of trouble, they sent me a new camera that works fine.

    Raul

  3. #3
    Join Date
    Oct 2005
    Location
    Auckland, NZ
    Posts
    5
    Thanks for that information, raulvesna. I once had an older DSC-P8 Sony camera that got a stuck pixel. I had purchased it as a parallel import for NZ$400 less than the normal price. I sent it in for repair, and after 11 weeks ended up just getting a new camera. I certainly don't want to go through that again . I am worried though about dismantling the camera and cleaning the CCD, IR Sensor or Lens Assembly. Maybe I should get the camera fixed at a professional repair place rather than risk Sony doing it? I think dismantling a piece of high tech equipment would be beyond me

  4. #4
    Join Date
    Jan 2006
    Posts
    2

    DSC-P150 Dust on CCD an easy fix for me...

    I read the post about the complicated 4 hour procedure to clean the DSC-P200 and was amazed and horrified. I just had this dust problem with my DSC-P150 and... well I admit it took me about 2 hours to figure it all out, but the actual procedure took about 10 minutes once I knew what I was doing. I took pictures and put together instructions in the hopes that this will help somebody.
    http://www.geocities.com/ihillway/

  5. #5
    Join Date
    Oct 2005
    Location
    Auckland, NZ
    Posts
    5
    Hi there, thanks for that info! I did get the camera professionally repaired in the end, but if the problem returns, I will follow your instructions as they make dismantling the camera look very easy. I'm sure they will help many people Thanks again!

  6. #6
    Join Date
    Oct 2005
    Posts
    3

    i wouldn“t do this

    I wouldn“t disassemble my camera because of dust.
    But I heard of the possiblility of using a Vacuum Micro Attachment kit
    http://www.kk.org/cooltools/archives/001075.php
    for cleaning Sony DSC-Pxxx cameras. I think that“s way safer.

  7. #7
    dave.lawrence Guest

    P150 cleaning success

    I had exactly the same problem - except Sony want to charge £120 in the UK. I followed the instructions at http://www.geocities.com/ihillway/ and cleared out the dust with canned-air. Considering the location of the dust, i.e. on the sensor behind the lens, I wouldn't think that any vacuum solution would work too well. Instructions were clear, easy to follow and I didn't lose a single screw!

  8. #8
    Brian Edmeades Guest

    Smile http://www.geocities.com/ihillway/

    Hi there - - http://www.geocities.com/ihillway/


    Just wanted to add my sincere thanks for the information provided on cleaning a Sony DSC-P150.

    Having just returned from holiday I was having exactly the same problems as you described with a black spot/shadow on all my zoomed pictures.

    Your instructions and fact finding on this problem enabled me to confidently clean my camera in about half an hour and at a cost of just one can of compressed air. When I dismantled the camera I found a visible piece of dust/flick on the sensor exactly as you did. My only concern now is that it doesn't happen again.

    Thank you once again for a superb piece of instruction.

    Kind Regards

    Brian Edmeades

    Somerset England

  9. #9
    Join Date
    Jan 2006
    Posts
    2
    Hello again,
    I am glad that some people have been able to use the instructions I put up to fix their cameras.
    Geocities is shutting down, so I have moved my instructions here:
    http://sites.google.com/site/dscp150/

  10. #10
    Join Date
    Jul 2004
    Location
    Oregon
    Posts
    4,146
    Unfortunately,
    Dust specks were indeed one of the real big problems of the Sony P-series camera. The solution is up to you. Some folks have disassembled the camera to overcome the problem. Please just know that dust specks were inherent tothe design of the P-series cameras.

    Sarah Joyce

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 

All content, excluding forum posts, is © 1997 - 2012 Digital Camera Resource Page LLC (R).