PDA

View Full Version : DX7590 Picture Transfer



Creaker
01-10-2005, 05:33 PM
Is there a way to put pictures back on the SD card that have already been transferred to the computer? I know you can put them back into the Favorites on the internal memory, but you can't print from the internal memory at places like Walmart, can you? You have to use the SD card, right? :confused:

Creaker
01-12-2005, 02:07 PM
Yahoo....there is a way! I emailed Kodak support and they told me how to do it.....

To transfer images back to your camera, please follow these instructions.

1. Connect your camera to the computer then turn your DX7590 Camera on.
Or, place your DX7590 Camera on a Dock and press the transfer button.
2. Once the transfer prompts appear on your computer, choose the option
to "CANCEL."
3. Open KODAK EASYSHARE Software.
4. Select a picture.
5. Click on the "Edit Picture" button.
6. On the "Edit" page, you will see an option for "save As" in the
lower right corner, click "Save As".
7. On the "Save As" window that opens up, you will see a drop-down menu
labeled "Save In". Select your camera from this list.
8. In the large white portion of the "Save As" window, you will get an
option for "Picture Card". Double-click "Picture Card".
9. In the large white portion of the "Save As" window, you will now get
an option for "DCIM". Double-click "DCIM".
10. Click the "Save" button.
11. Click the "Close" button.
12. Repeat 4-11 for each picture.

Guess what? It works, too! :D

Captain Maniac
01-12-2005, 07:08 PM
I wonder if this works with the Kodak CX7530? I guess there's only one way to find out...

Captain Maniac
01-12-2005, 07:18 PM
Yahoo....there is a way! I emailed Kodak support and they told me how to do it.....

7. On the "Save As" window that opens up, you will see a drop-down menu
labeled "Save In". Select your camera from this list.
8. In the large white portion of the "Save As" window, you will get an
option for "Picture Card". Double-click "Picture Card".

Guess what? It works, too! :D

Didn't work for me, unfortunately (with the CX7530). I got as far as the
Save As window, but it wouldn't allow me to do a "Save In". This may have something to do with the fact that I'm using the Macintosh version of EasyShare software.