Z1 triangular screwdriver?

[hit_my_bottom]

I need a triangular screwdriver so I can open and clean my Z1 Finepix.

I have attached a photo of the screw.

Does onyone have any idea where I can get this type of screwdriver?

[P_Schneider]

I've never seen one like that before. Knowing Fuji it's probably a proprietary screw. You might be able to get by with a tiny flathead but that has the danger of stripping out the screw head.
I would advise against opening the camera unless it's already out of warranty because doing so will certainly void any warranty you have on it.
Is there some way for dirt/dust to get into that camera?

Looking at my F10 it has the same screws, hope I never have a reason to open it.

[stever06]

If you really want to go down that road, then the driver you want is called a tri-wing tip. You will usually find it at fastener supply in a kit of bit tips specially designed for and listed as "Security Screws". Google that and see what you come up with. You might be able to buy individually as kits run in the $30-40 range.

[bamawoody]

It looks like a triwing to me. Look on McMaster Carr webs site. http://www.mcmaster.com/