PDA

View Full Version : Cable for PC connection to DMC-FZ20


bayzer
03-04-2007, 11:42 PM
I have a misfit cable that came with the FZ20. It has a male USB connector at one end and a male rectangular mini connector at the other end.

The small connector is about 2 x 6 mm that is too large for the opening (about 5 mm wide) that is marked "AV OUT/digital" on the FZ20.

No part numbers show up in the instruction booklet.
Any suggestions where to get a valid part number, and where to buy a cable that will fit ? Or have one for sale?
I tried the Panasonic site and several Parts sites but the AV connectors showing all look too big.


bayzer

Honest Gaza
03-05-2007, 03:35 AM
In my manual there are 2 cables listed :

AV Cable K1HA08CD0002
USB Cable K1HA08CD0001

genece
03-05-2007, 05:41 AM
That is the cable for transferring photos to your PC......the AV out cable has a similar end on one side and compoment cables on the other.
Page 95 of the USA manual shows the cable under "Playing back pictures with a TV screen"
But both cables should fit the same place......I wonder if its possible you or someone else mixed the cable with one from perhaps a card reader?

Isn't this USB wonderful, so many ends that look similar.