View Full Version : Will this Power Adpter blow up my camera?
lime240z
11-19-2006, 12:09 PM
One I have now is for my FujiFilm FinePix2600. Specs: Digital Concepts, Model CH-700, Input:100-140V AC 60Hz 22W, Output: 3V DC 2100mA.
The adapter listed in the A540 Users Guide has these specs: Input: 100-240 V AC (50/60 Hz), Output: 3.15 V DC, 2.0A.
Will the Digital Concepts adapter blow up my Canon A540 if I use it?
I do not anticipate using an adapter much if at all.
Thanks
BowerR64
11-19-2006, 01:17 PM
will the plug in fit?
You need to find out the polarity. Is the center the same polarity on both? You know the + and the - some say and some dont.
I just searched and found this link Canon powerpack polarity (http://groups.google.co.ke/group/rec.photo.digital/browse_thread/thread/9919e0f8253c6343/f9be4a9eb087a5d9?hl=fr) they say the tip is + on the canon supply. So if you can find out if the fuji is + on the tip, or the center then it should be fine.
Remember they said it is + so im not sure.
lime240z
11-19-2006, 03:43 PM
Thanks. Plug fits. Did not mention that the Fuji adapter also says Switching Power Supply on the label. On the Fuji camera at the jack there is the symbol + (plus) c (with a dot it it) - (minus). All three symbols are inside diamonds. This indicates the polarity of the Fuji, I presume, but the Canon only has DC In.
BowerR64
11-19-2006, 07:13 PM
right, the canon doesnt say so thats why its a 50/50 chance it will work. If it doesnt work it may blow somthing i dont know.
So have you tried it or are you to scared it will blow up the camera? I would think they are fused, if you get it backwars it should just pop a fuse and still work under battery opperation but im not sure of that.
If i had the adapter ide try it with my A70 because i could probobly fix it. I dont have the DC adapter.
Do you have a meter? a volt meter? you could test it with a meter. The three screws on the bottom of the camera are ground. If you touch a continuity tester to those screws, then ground or - on the DC plug you will get infinite meaning its connected to ground and that would be -
lime240z
11-19-2006, 09:05 PM
Haven't tried it, never will unless I get an unqualified answer. Too many ?????Canon will not respond to the question. Thanks for your time.
Powered by vBulletin® Version 4.1.9 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.